What is crosstalk glitch and how do you fix it ?
What is crosstalk glitch and how do you fix it ?
What is crosstalk glitch and how do you fix it ?
-
- Posts: 2
- Joined: Tue May 13, 2014 11:13 am
Re: What is crosstalk glitch and how do you fix it ?
In the lower node designs , the routing of interconnects are close to each other . This can then be considered as "two metal sheets separated by a dielectric" which effectively means there is a measurable capacitance between these nets. This is called as coupling capacitance . This coupling capacitance has mainly two effects based on whether the signal on the "victim" net is transitioning or static . If the signal is static , the coupling capacitance has the ability to change its functional value ( Noise effect ) and if the signal is transitioning , the coupling capacitance can change the transition time and hence the delay of the signal ( crosstalk effect ) . These can be fixed using the following method .
1. Break the victim net by inserting an buffer in between .
2. Provide sufficient spacing between the victim and aggressor net to reduce coupling capacitance.
3. Route the victim / aggressor net in a different metal layer to remove coupling capacitance.
4. Strengthen the signal on the victim net by using a lower VT or higher drive strength cell .
5. Weaken the strength of the aggressor net cell . ( Least preferred ) .
1. Break the victim net by inserting an buffer in between .
2. Provide sufficient spacing between the victim and aggressor net to reduce coupling capacitance.
3. Route the victim / aggressor net in a different metal layer to remove coupling capacitance.
4. Strengthen the signal on the victim net by using a lower VT or higher drive strength cell .
5. Weaken the strength of the aggressor net cell . ( Least preferred ) .
Re: What is crosstalk glitch and how do you fix it ?
Thanks Arun. It helped a lot
Can you please reply to my other queries also?
![Smile :)](./images/smilies/icon_e_smile.gif)